Image Alt

Cups

CUPS

#2095 1QT Pressurized Siphon Cup Assembly – Square 90° Nipple

#9730 3oz Gravity Cup Assembly – T-Model™

#9740 400cc Gravity Cup Assembly – T-Model™

#9760 600cc Aluminum Gravity Cup Assembly – T-Model™

#9775 1000cc Gravity Cup Assembly – T-Model™

#9080 250cc Mini Cup Assembly plus 2 extra cups

#9850 400cc Gravity Cup Side Mounted GXPC

#9860 600cc Nylon Gravity Cup Assembly T-Model™

2 QT. Pressure Pot Assembly Kit #5432

This Kit has everything you need to add additional material capacity using your 4 or 5-stage Fuji Spray® HVLP System. Features include:

  • Twice as much material capacity than your bottom feed spray gun, and more than three times the capacity of your gravity feed spray gun
  • Specially designed pot, lid, and adapter
  • Ability to spray at any angle, including upside down
  • Smaller profile to reach tight corners
PLEASE NOTE: You will need both a standard 25ft hose plus a 6ft. whip hose in order to use your Fuji Spray® 2 Qt. Pressure Pot. If you are using model 9600-G G-XPC spray gun, you will also need a 9060 L-Fitting.

Gravity Cup Conversion Kit #9960

This conversion kit allows any Fuji Spray® bottom-feed gun to be converted to a gravity style.

It includes a 400cc aluminum gravity cup, stainless steel U-tube, and pressure tube with a check valve.

Mini 3 oz Gravity Cup #9730 T-75G

The mini 3oz Gravity Cup was designed to meet the need for a small touch-up gravity cup for use in the automotive field.

This cup can be used with the Fuji Spray® T-75G gravity spray gun and is perfect for spraying smaller items or daily touch-ups works. The 9730 model (as shown) is pressurized and comes with a pressure tube. This cup features a screw-on lid with a rubber gasket.

PLEASE NOTE: For the side-mounted G-XPC, please refer to part #8080. The #8080 is a Mini 3oz gravity cup for the side-mounted G-XPC spray gun ONLY.

Mini 3 oz Cup Set #9080

This complete 250cc (8oz) mini cup assembly includes 2 extra cups and 3 heavy-duty lids, equipped with gaskets.

This assembly is lightweight, taking the weight off the wrist. The small cup size allows access to confined areas such as cabinets interiors and bookshelves. Great for storing paints and stains, and touch-up work. This 3-Cup Set has been popular with the fine instrument and automotive touchup industries.

PLEASE NOTE: This cup assembly can be used with the Fuji Spray® XPC spray gun as well as the T-Model™, but is not practical for spraying larger pieces.

16114 3MTM PPS Mini Size Kit

The 3M™ PPS Mini Kit includes 50 Mini size lids with welded-in filters, 50 liners (6oz), and 20 sealing plugs.

As part of the 3M™ PPS system, this kit allows you to measure, mix, filter, and spray with ease.

The 3M PPS Mini Kit is used in combination with the 3M™ PPS Type H/O 6oz Mini Pressure Cup above

16124 3M PPS Type H/O 28oz Large Pressure Cup

The 3M™ PPS H/O Cup & Collar is a pressurized (high output) hard cup and collar set that supports and holds the 3M™ PPS flexible liner used in the 3M™ Paint Preparation System.

This product is intended for use in place of metal cups on most pressure spray guns.

3M PPS Large Kit #16024

The 3M™ PPS Large Kit contains 25 lids with micron filters, 25 liners (28oz), and 10 sealing plugs for use with the 3M™ Paint Preparation System.

It’s an all-in-one painting system that allows painters to mix/measure, filter, spray (in any direction) and temporarily store coating materials. PPS disposable lids contain a welded-in filter that strains the paint material while spraying.

The 3M PPS Large Kit is used in combination with the 3M™ PPS Type H/O 28oz Large Pressure Cup above.

3M PPS Type H/O 6oz Mini Pressure Cup #16121

The 3M™ PPS H/O Cup & Collar is a pressurized (high output) hard cup and collar set that supports and holds the 3M PPS flexible liner used in the 3M™ Paint Preparation System.

This product is intended for use in place of metal cups on most pressure spray guns

Fuji Spray Systems®

800 Alness Street, Toronto, Ontario M3J 2H5 1-800-650-0930 support@fujispray.com
X